Advent LCD4WM Manual de usuario descargar pdf (Pagina 9)

Connecting the Video Signal

18. If used with an Advent LCD Monitor such as LCD4WM or LCDM42

the camera power and signal will be provided through a single cable

to the monitor (supplied with the monitor).

19. If using an alternative monitor, use the adaptor harness to split the

signal to RCA connections then connect to the female RCA input on

the alternative monitor.

Reverse/Normal Image Adjustment

The camera comes standard with a reversed image, designed for mounting

at the rear of the vehicle. If you need to change to a forward or normal

image view, clip the blue jumper wire loop on the wiring cable (labeled

“Mirror Selection” below) to change the camera image to normal. Secure

the clipped wires with electrical tape. To change back to reverse image

view, reconnect the blue wires and secure with electrical tape.

Camera Wiring

20. Note: If used with an Advent LCD Monitor such as LCD4WM or

LCDM42 the camera power and signal will be provided through a

single cable to the monitor (supplied with the monitor).

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Advent LCD4WM Manual de usuario Pagina 9